Kb-electronics KBMK-24DF Manuale Utente Scaricare il pdf (Pagina 17)

FIGURE 13

FLOW CHART TO PROGRAM MOTOR CURRENT FROM 3.6 AMPS TO 2.5 AMPS

*The drive's factory setting of Motor Nameplate Current (Function No. 0.01) is 3.6 Amps.

FIGURE 14

FLOW CHART TO PROGRAM SET FREQUENCY FROM 5.00 Hz TO 43.21 Hz (DRIVE IN STOP MODE) *

*If Function No. 2.01 is set to "0000", frequency change requires "ENTER". Throughout this sequence you must

proceed to the next step within 20 seconds, before the "Press Enter Key" step, or the display will revert to "05.00".

The new value will be stored in Function No. 3.00.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 52 53

Nessun commento

Kb-electronics KBMK-24DF Manuale Utente Pagina 17