Kb-electronics KBMM-225D Manuale Utente Scaricare il pdf (Pagina 30)

13.3 Reversing and Dynamic Braking – The optional patented APRM® provides anti-plug “instant” reversing

and solid state dynamic braking. The APRM® is built-in as standard on Models KBCC-R™ and KBPB™.

Contact the Sales Department for more information.

14 OPTIONAL ACCESSORIES

14.1 Auxiliary Heat Sink (Part No. 9861) – Doubles the horsepower rating of the control.

14.2 Barrier Terminal Accessory Kit (Part No. 9883) – When used with the Auxiliary Heat Sink, it converts the

quick-connect terminals of the control to a barrier terminal block.

14.3 Barrier Terminal Board (Part No. 9897) – Converts the quick-connect terminals of the control to a barrier

terminal block. Contains PC board mounted line and armature fuse holders (fuses supplied separately).

Plugs onto the quick-connect terminals of the control.

14.4 SI-6 Signal Isolator (Part No. 9444) – Provides isolation between non-isolated signal sources and the con-

trol. Plugs onto the quick-connect terminals of the control.

14.5 Run/Brake Module (Part No. 9952) – Used for applications that require rapid stopping of the motor.

Contains a barrier terminal block.

14.6 Dial Plate and Knob Kit (Part No. 9832) – Provides indication of the Main Speed Potentiometer

position (0 - 100 %).

14.7 Finger-Safe Cover (Part No. 9564) – Converts the control from open chassis to the IP-20 standard. (Fuse

holders must be removed when installing the finger-safe cover.)

14.8 DIN Rail Mounting Kit (Part No. 9995)

14.9 KBAP-240D Current Sensing Overload Protector (Part No. 9106) – Provides overload current sensing

and protection of DC motors and speed controls rated 1/8 - 3 HP by sensing armature current. Operates

on 115 or 230 Volt AC line input.

1 2 ... 25 26 27 28 29 30 31 32

Nessun commento

Kb-electronics KBMM-225D Manuale Utente Pagina 30